Eneo PXC-2080Z03, Installation And Operation Manual

Page: 79 / 136

Web Admin User Manual
- 29 -
is wrong
5. Device Configuration
You set up the connection between Server and the camera in this part of configuration. That
includes Video data, external devices, Input / Output, Alarm control, and etc.
5.1. Serial Ports
There are two serial ports configurable in the system, COM and AUX. COM port is primarily
used for console, and AUX is for PTZ control, but they both can be used for other purposes
when necessary.
5.1.1. Serial Input Mode
When serial ports are in Serial Input Mode , Server can be triggered by the external sensors to
send images from the camera by email, or FTP. It can also activate Alarm Output by input from
sensors inputs. For example in a real life, if a dam’s water level comes to a pre-defined value,
the server can send the images of the dam’s water level meter from cameras. Another example
is, when a car running on highway exceed the speed limit, it can send the picture of the car.
To configure, click Serial Ports on Device Configuration. In COM Port or AUX Port , select Serial
Input
and click
Apply
button to apply the change. The system will reboot then.