Eneo PXC-2080Z03, Installation And Operation Manual

Page: 119 / 136

Web Admin User Manual
- 69 -
Example 1) Recording Condition: Always , Schedule
•
Pre-Recording Speed : 1 fps
• Pre-Alarm Count
: 5
• Post-Recording Speed
: 10 fps
• Post-Alarm Count
: 5
•
Since the recording condition is Always and Schedule, Pre-Recording Speed is in effect.
So the recording speed is 1 fps. Other values don’t affect the recording.
Example 2) Recording Condition:
Motion
,
Sensor
•
Pre-Recording Speed : 1 fps
•
Pre-Alarm Count : 5
•
Post-Recording Speed : 10 fps
•
Post-Alarm Count : 5
•
Post-Recording Speed is in effect. So the recording speed is 10 fps when Motion is
detected. Also, Pre-Recording Speed is in effect, so image is stored by Pre-Alarm Count
setting. So 5 images will be recorded before Motion is detected (speed: 1 image per
second). After Motion Detection (or Sensor) is over, Post-Recording Speed becomes in
effect now, so only 5 images out of 10 will be stored afterwards. That means that the
images captured until 0.5 second after Post-Alarm images are stored.