14
Installation
Installation
Die Kamera ist für den Einsatz in Anwendungen mit Aufbau- oder Abhängungsmontagen
geeignet und das Befestigungselement muss Tragelasten bis 4,5 kg unterstützen. (Für
Abhängungsmontage wird Hängemontagezubehör benötigt).
Die Kamera sollte an einem Bauelement wie etwa Hartholz, einem Wandständer oder
Deckenbalken befestigt werden, welches das Gewicht der Kamera trägt.
1. Bohren Sie die Löcher mit Hilfe der beiliegenden Schablone in die Decke.
2. Befestigen Sie die Kamera mit den beiliegenden Dübeln (4x) und Befestigungs-
schrauben (4x) an der Decke.
ACHTUNG:
Es muss ein Silikon-Dichtmittel verwendet werden, um die Was-
serdichtigkeit des Gehäuses sicherzustellen.
Die Kamera darf manuell (mit Händen) NICHT geschwenkt oder
geneigt werden.
Dadurch kann der Schwenk-/Neige-Mechanismus der Kamera
beschädigt werden.
Decke oder Wand
Bohrschablone
Kunststoffdübel (4x)
Befestigungsschraube (4x)
Kameramodul
Summary of Contents for MEP-62M2812M0A
Page 34: ...34 ...
Page 35: ...35 IT ...