6
Installation
Installation
The camera is for use in surface or pendent mounting applications, and the mounting
member must be capable of supporting loads of up to 4.5 kg. (Pendent mounting must
use pendent mount accessory.)
The camera should be attached to a structural object, such as hard wood, wall stud or
ceiling rafter that supports the weight of the camera.
1. Make screw holes on the ceiling using the supplied mounting Template Sheet.
2. Fix the camera to the ceiling using supplied Anchors (4x) and Mounting Screws
(4x).
CAUTION:
A silicone rubber sealant must be applied to seal the housing to
secure waterproofing
Do NOT try to pan and tilt the camera head manually by hand.
The camera pan/tilt gear can be damaged.
Ceiling or wall
Template sheet
Plastic Anchor (4x)
Mounting Screw (4x)
Camera Module
Summary of Contents for MEP-62M2812M0A
Page 34: ...34 ...
Page 35: ...35 IT ...
