78
– Obtain DNS Server via DHCP:
Automatically use the DNS server settings provided by the
DHCP server.
– Use the following DNS server address
to enter the desired DNS server by specifying the
following:
* Domain name:
Enter the domain(s) to search for the host name used by the network
camera. Multiple domains can be separated by semicolons (;). The host name is always
the first part of a Fully Qualified Domain Name, for example, myserver is the host name in
the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
* DNS servers:
Enter the IP addresses of the primary and secondary DNS servers.
• Host Name Configuration:
– Host Name:
Enter the host name to be used as device information in the client software.
• Services:
– HTTP port:
Enter a port to receive a service through the HTTP. Default port number is “80”.
– HTTPS port:
Enter a port to receive a service through the HTTPS. Default port number is
“443”.
– RTSP port:
Enter a port to receive a service through the RTSP. Default port number is
“554”.
• ARP/Ping Setting:
– Enable ARP/Ping setting:
The IP address can be set using the ARP/Ping method, which
associates the unit’s MAC address with an IP address. Check this box to enable the service.
Leave disabled to prevent unintentional resetting of the IP address.
• Link Speed Control:
– Link Speed:
User can select either 10Mbps or 100Mbps.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to
clear all of the information you entered without saving it.
