47
2) Event Out
▽
SMTP(E-Mail)
The network camera can be configured to send event and error email messages via
SMTP (Simple Mail Transfer Protocol).
• SMTP (E-Mail) Setting:
Select “Enable” to activate the SMTP operation.
– Sender:
Enter an email address to be used as the sender for all messages sent by the
network camera.
– Interval:
Represents the time interval of the email notification when events occur several
times.
– Aggregate events:
Shows the maximum number of emails sent within each interval.
– Use Mail Server:
Check the box is you are using a mail server to receive event notification
and image email.
* Mail Server:
Enter the host names (or IP addresses) for your mail server.
* Port:
Enter the port number for your mail server. Enable the sending of notifications and
image email messages from the network camera to predefined addresses via SMTP.
– Enable use (SMTP) authentication:
Check the box if your mail server requires
authentication.
* User name/Password:
Enter the User name and Password as provided by your network
administrator or ISP (Internet Service Provider).
* Login method:
Choose a log-in method in the drop-down list:
AUTH LOGIN / AUTH PLAIN
• SMTP (E-Mail) Receiver:
User can assign up to 8 receivers.
– Receiver #:
Enter an email address.
