50
– Event:
This function can set required image frequency (1~2fps) when event detected.
– Post-event:
This function is the counterpart to the pre-trigger buffer described above and
contains images from the time immediately after the trigger. Configure as for pre-event.
– Prefix file name:
This name will be used for all the image files saved. If suffixes are also
used, the file name will take the form <prefix> <suffix>.<extension>.
– Additional suffix:
Add either a date/time suffix or a sequence number, with or without a
maximum value.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to
clear all of the information you entered without saving it.
