ENENSYS Divi Catch RF, User Manual, Page: 9 / 40

Analysis modes: DVB and ATSC
Two modes for interpreting MPEG2-TS signalling are available: DVB and ATSC. DVB
Mode is used for interpreting PSI/SI signalling, and ATSC mode is used for interpreting
PSIP/SI signalling. Switching between modes is performed through the TS Mode drop-
down list
General use
All tabs can be detached for a more comfortable viewing through a drag-and-drop of
the tab outside of the TS analysis section. This viewing is especially useful to real-
time monitor a specific table at the same time as a different table or RF parameter.
All tabs can be detached and become independent windows. Close a detached tab to
reintegrate it to the list of tabs inside the TS Analysis section.
“Programs” tab displays all the services
contained within the stream. In this
case, 3 programs are detected
(“
Cambodia ”, “ Kenya ” and “ USA ”
video). Several information are given
such as PID, stream_id, scrambled or
not...
DVB Mode (PSI/SI Signalling)
Other tabs provide advanced analysis. SDT, CAT, BAT, NIT, TDT and TOT tabs provide PSI/SI table
parsing.
The MIP tab provides parsing of Mega Frame Initialization Packets that are used to synchronize all
transmitters making up a single frequency network.
Real time PID monitoring Network Information Table analysis
ENENSYS DiviCatch RF - Manual Page 9 / 40
Divi Catch RF
User Guide