38
0002-40-38085 Rev 01 © Enduro Pipeline Services, Inc. All Rights Reserved.
2.9.
Loading DdL™ Caliper Tool into Pipeline
2.9.1.
Verify that there is no pressure on the section of pipeline where the DdL™ Caliper Tool will be loaded.
2.9.1.1.
Trap Isolation procedures will need to be followed per the type of Trap configuration currently installed on the pipeline.
2.9.2.
The DdL™ Caliper Tool is designed to travel ONLY in a forward direction.
2.9.2.1.
NOTICE
:
Loading and Unloading from the Pipeline MUST be adhered to the above.
2.9.3.
The DdL™ Caliper Tool can either be pushed or pulled into the pipeline.
2.9.4.
Pushing the DdL™ Caliper Tool into the Pipeline
.
2.9.4.1.
Pushing the DdL™ Caliper Tool is the preferred method.
2.9.4.2.
Assemble the provided Push Poles that were shipped with the DdL™ Caliper Tool as part of the Support Equipment.
(
refer to 2.9.3.2. Table
)
2.9.3.2. Table
