11
0002-40-38085 Rev 01 © Enduro Pipeline Services, Inc. All Rights Reserved.
2.2.2.
Keep the Laptop Computer out of the elements as much as possible.
2.2.2.1.
Premature Failure to the Laptop Computer could occur if left out in the Extreme Heat, Extreme Cold, Rain and/or Snow.
2.2.3.
The Laptop Computer will be shipped from ENDURO fully charged, but the battery life will deplete over time.
2.2.3.1.
CUSTOMER will verify that the Laptop Computer has been plugged into an AC outlet to allow the battery to reach a full
charge prior to beginning the survey.
2.2.3.2.
Contact ENDURO for any IT issues regarding the Laptop Computer that was provided.
2.2.4.
Locate the different computer ports that are on either side of the Laptop Computer.
2.2.4.1.
3 – USB ports
2.2.4.1.1.
One USB port will be used to communicate with the DdL™ Caliper Tool.
2.2.4.1.2.
One USB port will be used to connect an External Hard Drive that ENDURO has provided.
2.2.4.1.3.
One USB port will be used to connect the AGM2 Box.
2.2.4.2.
1 – Ethernet Port
2.2.4.2.1.
For ability to connect an Ethernet Cable from the Laptop Computer to an Internet provided source.
2.2.4.3.
1 – Power Cable Port
2.2.4.3.1.
Connect Laptop Computer to AC power via Charging Cable.
2.3.
AGM2 Box
2.3.1.
ENDURO provides an AGM2 Box as part of the Standard Support Equipment shipped with the DdL™ Caliper Tool.
2.3.1.1.
The AGM2 Box will be inside a protective Pelican Case.
2.3.1.2.
Located inside the AGM2 Box will be a communication port and a power button.
2.3.1.2.1.
Refer to
“Powering Up the AGM2 Box”
for further details.
2.3.2.
The main purpose of the AGM2 Box is to synchronize the DdL™ Caliper Tool with GPS Time.
2.3.2.1.
This time sync must be done after the DdL™ Caliper Tool has been powered ON.
2.3.2.1.1.
IF the DdL™ Caliper Tool has been powered down, an AGM2 sync MUST be done again when the tool is
powered back on.
