Operation
Mounting the
wheelset
13
4. Secure the wheel with a screw (M6) and put the blue
protective cap on (see Fig. 7).
Fig. 7: Mounting the wheelset 2
5. Fasten the two rubber feet to the U-shaped plates using
two nuts and bolts (M8) (see Fig. 8).
Fig. 8: Mounting the wheelset 3
6. Mount the plate with the feet to the frame using two bolts
and nuts (M8) (see Fig. 8).
7. Stand the device on the wheels and rubber feet.
8. Put a plastic disk on the fastening screw (M8) and fasten
the handle to the bracket on the frame. Once again, on
the inner side, put a plastic disk on and secure the fas-
tener with a nut (M8) only tightly enough so that the arm
can still turn slightly.
Mounting the handles
