Endress ESE 20YW/RS, Original Operating Manual

Page: 25 / 52

Status at: June 2016 Rental Line
25
LED diode lights up if the MCB (mains network circuit breaker) is
switched on. The diode is actuated with the output MCB
CLOSE/OPEN (AMF 8/9) or by the signal MCB Feedback (AMF
20/25).
13 Mains voltage OK. The green LED diode lights up if there is a volt-
age present from the mains network and its parameters lie within
the limit values.
14 Mains failure. The red LED diode begins to flash if a mains failure
was recognised and light up continuously after starting the genera-
tor until removal
of the mains failure
Table 6 - 2 Operation displays for the E-MCS 6.0
Display and control buttons of the E-MCS 6.0
Item Button Description
15 Graphical black-white display, 128x64 points
16 PAGE button. Use this button to leaf through the displayed pages.
See the chapter "Display window and page structure" under this
table for more
details
17 UP button. Use this button to increase the value.
18 DOWN button. Use this button to decrease the value.
19 ENTER button. Use this button to end entry of setting values or to
move on the side of the history to the right.
Table 6 - 3 Display and control buttons of the E-MCS 6.0
6.1.1.1 Display window and page structure
Display of information is built up with structuring in the "Pag-
es" and "Window". Use the PAGE button to leaf through the
pages.
1. The Measurement page consists of windows in which
the measured values such as voltages, current, oil
pressure, etc, as well as calculated values such as the
output of the generator, statistical data and alarm lists
are displayed in the last window.
2. The Set points page contain all values to be set, ar-
ranged in groups, as well as a special group for enter-
ing passwords.
(1)
(2)
(3)