5
Commissioning
2
Commissioning
2.1
Inserting a SIM card
You will need a SIM card from a network operator of your choice to be able
to use the E-RMA SIM module. This SIM card must be inserted in the E-RMA
SIM module before you can use the module. You will find instructions on
how to do this below.
NOTICE!
Check to ensure that the SIM card has already been activated by your net-
work operator before you insert it in the E-RMA SIM module.
► Do this by inserting the SIM card into any mobile device to check that the SIM
card actually works.
NOTICE!
Ensure that the SIM card that you are going to insert does not need a PIN
to be entered.
► You can disable the SIM card’s PIN entry requirement by inserting the SIM
card in an unlocked mobile phone and disabling the PIN entry requirement
from there.
Conditions
Activated and PIN-free SIM card
Inserting a SIM card
1. Open the control panel on your generator by unscrewing the securing
screws.
This means that you have to go to the back of the control module as this
where the E-RMA SIM module attachment is
located.
2. Now insert the SIM card
in the SIM card slot
.
3. Connect the supply voltage from the control module to the E-RMA SIM mod-
ule. The E-RMA SIM module is compatible with 8 - 36V DC.
4. Now insert the E-RMA SIM module
CAREFULLY in the control module.
The E-RMA SIM module will light up red after insertion (seeFig. 2-1 Inserting
a SIM card).
5. Secure the control panel back on the unit.
The SIM card has been successfully inserted.
Fig. 2-1 Inserting a SIM card
