6
Commissioning
2.2
Software settings
After you have inserted the SIM card, you will have to make additional soft-
ware settings in order to activate the E-RMA SIM. These settings are need-
ed so that you can enable the unit later on.
NOTICE!
You will need to enter an APN name, user name and password for these
software settings. This data can be obtained from your network provider.
► The APN name can look like this: web.vodafon.de.
► The APN user name can look like this: Endress
2.2.1
Activating “Engineer” mode
You must first activate "Engineer" mode on your control module before
you can enter the software settings. You will find instructions on how you
can activate this mode below.
2.2.2
Activating the E-RMA SIM
As "Engineer" mode has been activated, it is now possible to activate the
E-RMA SIM module as well.
Conditions
Activated and PIN-free SIM card has been inserted.
“Engineer” mode has been activated.
Generator is ready for operation.
Proceed as follows to activate the E-RMA SIM module:
1. Start your power generator’s control mod-
ule
2. Hold the Enter button
down and then
press the “Page” button four times
.
3. This will open the user interface. Use the
arrow keys to move between “User” and
“Engineer”.
4. Select “Engineer” and then press enter to
confirm your selection
.
Engineer mode has been set up
