Tophit H CPS471/CPS471D
Hauser
9
Input
Measured values
pH value
Temperature
Measuring range
0 to 14 pH
–15 to 135 °C (5 to 275 °F)
"
Caution!
Note the process operating conditions.
Power supply
Electrical connection CPS471
The sensor is connected to the measuring transmitter using the special measuring cable CPK12.
a0003887-en
Fig. 9:
Special measuring cable CPK12
!
Note!
• The cable cors Yellow and White are connected on the sensor side.
• Make sure you comply with the instructions for connecting the sensor (wiring diagram) in the Operating
Instructions of the transmitter. The transmitter has to be appropriate for the use of ISFET sensors (e.g.
Liquiline M CM42, Mycom S CPM153 or Liquisys M CPM223/253-IS).
A transmitter with only a standard pH input is inappropriate.
Electrical connection
CPS471D
The sensor is electrically connected to the transmitter by means of the special measuring cable CYK10.
a0003350
Special measuring cable CYK10
