8 Troubleshooting
StamoSens CSM 750 / CSS 70
30
EHauser
8.2
Replacement of device fuses
#
Warning!
Disconnect the device from the mains before changing fuses.
Only use the following fuses:
– 80 ... 250 V AC connection: 5 x 20 mm, time-lag, 500 mA fine-wire fuse
– 24 V DC / AC connection: 5 x 20 mm, time-lag, 2 A fine-wire fuse
Other fuses are not permitted.
8.3
Disposal
The CSM 750 Transmitter and the CSS 70 Sensor contain electronic components and
must therefore be disposed of as electronic waste. When doing this, please also
observe local regulations.
