Wiring
Proline Prosonic Flow 93T Portable
26
Hauser
3.2
Connecting the connecting cable
#
Warning!
• Only use the connecting cables supplied by Hauser.
• The measuring device only complies with the general safety requirements in accordance with
EN 61010-1 and the EMC requirements of IEC/EN 61326 during storage battery operation.
Disconnect the charger from the measuring device for measuring operation.
Connect the connecting cable to the connections CH-DN (downstream) and CH-UP (upstream)
(
→
ä
26, No. 4 and 5). The connectors on the connecting cable and measuring device have the
same color code.
!
Note!
To ensure correct measuring results, route the cable well clear of electrical machines and
switching elements.
A0011480
Fig. 22: Transmitter connections
1
On/off switch (press switch
≥
3 seconds)
2
Current input connection
3
USB plug connection
4
Connecting cable connection (CH-DN, downstream)
5
Connecting cable connection (CH-UP, upstream)
6
FXA193/FXA291 modem connection
7
Charger connection (different adapters are available for the connection)
8
Current output connection
3.3
Post-connection check
• Are cables or the device damaged (visual inspection)?
• Does the supply voltage match the information on the nameplate of the charger?
• Is the connecting cable connected correctly?
DATA
I-IN
12V DC
SERVICE
CH-UP
CH-DN
1
2
3
7
6
5
4
I-OUT
8
