Proline Prosonic Flow 93T Portable
Commissioning
Hauser
27
4
Commissioning
4.1
Switching on the measuring device
The measuring device is switched on by pressing the ON/OFF switch
≥
3 seconds
(
→
ä
26, No. 1).
After being switched on, the measuring system performs a number of internal test functions. As
this procedure progresses the following sequence of messages appears on the onsite display:
The measuring device starts operating as soon as the startup procedure is complete.
Various measured values and/or status variables appear on the display.
!
Note!
If an error occurs during startup, this is indicated by an error message.
List of all error messages, see associated Operating Instructions on the CD-ROM.
Display examples:
PROSONIC FLOW 93
START-UP
RUNNING
Start-up message
Æ
PROSONIC FLOW 93
DEVICE SOFTWARE
V XX.XX.XX
Display of current software
Æ
CURRENT OUTPUT
…
Display of installed input/output modules
Æ
SYSTEM OK
→
OPERATION
Beginning of operation
