Proline Promass F 300 EtherNet/IP
Operation options
73
2. Close the Web browser.
3. If no longer needed:
Reset modified properties of the Internet protocol (TCP/IP) → 68.
If communication with the Web server was established via the default IP address
192.168.1.212, DIP switch No. 10 must be reset (from
ON
→
OFF
). Afterwards, the IP
address of the device is active again for network communication.
8.5
Access to the operating menu via the operating tool
The structure of the operating menu in the operating tools is the same as for operation via
the local display.
8.5.1
Connecting the operating tool
Via EtherNet/IP network
This communication interface is available in device versions with EtherNet/IP.
Star topology
4
2
1
3
5
5
5
A0032078
20
Options for remote operation via EtherNet/IP network: star topology
1
Automation system, e.g. "RSLogix" (Rockwell Automation)
2
Workstation for measuring device operation: with Custom Add-On Profile for "RSLogix 5000" (Rockwell
Automation) or with Electronic Data Sheet (EDS)
3
Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or
computer with operating tool (e.g. FieldCare, DeviceCare) with COM DTM "CDI Communication TCP/IP"
4
Ethernet switch
5
Measuring device
Ring topology
The device is integrated via the terminal connection for signal transmission (output 1) and
the service interface (CDI-RJ45).
