Endress+Hauser Proline Promass F 100, Operating Instructions Manual

Page: 74 / 122

Operation Proline Promass F 100 Modbus RS485
74
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n →  74
Preset value 1 to n →  74
Reset all totalizers
→  74
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Control Totalizer One of the following options is
selected in the
Assign process
variable parameter (→  66)
of the Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
• Corrected volume flow
• Target mass flow
*
• Carrier mass flow
*
Control totalizer value. • Totalize
• Reset + hold
• hold
• Reset + totalize
• totalize Totalize
Preset value One of the following options is
selected in the
Assign process
variable parameter (→  66)
of the Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
• Corrected volume flow
• Target mass flow
*
• Carrier mass flow
*
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
depending on the
selection made in the
Assign process variable
parameter:
•
Volume flow option:
Volume flow unit
parameter
• Mass flow option,
Target mass flow
option, Carrier mass
flow option: Mass
flow unit parameter
• Corrected volume
flow
option:
Corrected volume
unit
parameter
Signed floating-point
number Country-specific:
• 0 kg
• 0 lb
Reset all totalizers – Reset all totalizers to 0 and
start. • Cancel
• Reset + totalize Cancel
* Visibility depends on order options or device settings