Endress+Hauser Proline Promass A 100, Operating Instructions Manual

Page: 19 / 56

Proline Promass A 100 Installation
Hauser 19
Dimensions in SI units
DN A B C D E F G
[mm] [mm] [in] [in] [mm] [mm] [mm] [mm]
1 Approx.42 AF 1 ½ NPT 77.0 70.0 47.0 178
2 Approx.42 AF 1 ½ NPT 77.0 70.0 47.0 260
4 Approx.42 AF 1 ½ NPT 83.0 83.0 59.5 385
Dimensions in US units
DN A B C D E F G
[in] [in] [in] [in] [in] [in] [in] [in]
¹⁄₂₄ Approx.
1.65
AF 1 ½ NPT 3.0 2.8 1.85 7.01
¹⁄₁₂ Approx.
1.65
AF 1 ½ NPT 3.0 2.8 1.85 10.24
¹⁄₈ Approx.
1.65
AF 1 ½ NPT 3.3 3.2 2.34 15.16
For detailed information about using a rupture disk, refer to the Operating
Instructions for the device on the CD-ROM provided
Wall mounting
! WARNING
Incorrect sensor mounting
Risk of injury if measuring tube breaks
‣
The sensor should never be installed in a pipe in a way that it is freely suspended
‣
Using the base plate, mount the sensor directly on the floor, wall or ceiling.
‣
Support the sensor on a securely mounted support base (e.g. angle bracket).
The following mounting versions are recommended for the installation.
Vertical
• Mounted directly on a wall using the base plate, or
• Device supported on an angle bracket mounted on the wall