Endress+Hauser Proline Promass 83, Operating Instructions Manual

Page: 46 / 118

6 Commissioning Proline Promass 83 FOUNDATION Fieldbus
46 Hauser
6.2 Commissioning
Note the following points:
• The files required for commissioning and network configuration can be obtained as described on
Page 35.
• The device is identified by the FOUNDATION Fieldbus in the host or configuration system via
the device ID (DEVICE_ID). The DEVICE_ID is a combination of the manufacturer ID, device
type and device serial number. It is unique and can never be duplicated. The DEVICE_ID of the
Promass 83 is composed as follows:
DEVICE_ID = 452B481051-XXXXXXXXXXX
452B48 = Hauser
1051 = Promass 83
XXXXXXXXXXX = device serial number (11-digit)
6.2.1 Commissioning
The following description allows step-by-step commissioning of the measuring device and all the
necessary configuration for the FOUNDATION Fieldbus:
1. Switch on the Measuring Device.
2. Note the DEVICE_ID on the device nameplate (see Page 9).
3. Open the configuration program.
4. Load the device description file or CFF file into the host system or into the configuration pro-
gram. Ensure you use the correct system files. Refer to the example on Page 36.
The first time it is connected Promass 83 reports as follows:
– E+H_PROMASS_83_ xxxxxxxxxxx (Tag name PD-TAG)
– 452B481051- xxxxxxxxxxx (Device_ID)
– Block structure:
!
Note!
The Promass 83 is supplied with the bus address “250” and is thus in the address range reser-
ved for readdressing of field devices, between 248 and 251. This means that the LAS (Link
Active Scheduler) automatically assigns the device a free bus address in the initialization phase.
Display text (xxx... = serial number) Base index Description
RESOURCE_ xxxxxxxxxxx 258 Resource Block
TRANSDUCER_xxxxxxxxxxx 1100 Transducer Block
ANALOG_INPUT_1_ xxxxxxxxxxx 350 Analog Input Funktionsblock 1
ANALOG_INPUT_2_ xxxxxxxxxxx 390 Analog Input Funktionsblock 2
ANALOG_INPUT_3_ xxxxxxxxxxx 430 Analog Input Funktionsblock 3
ANALOG_INPUT_4_ xxxxxxxxxxx 470 Analog Input Funktionsblock 4
ANALOG_INPUT_5_ xxxxxxxxxxx 510 Analog Input Funktionsblock 5
ANALOG_INPUT_6_ xxxxxxxxxxx 550 Analog Input Funktionsblock 6
ANALOG_INPUT_7_ xxxxxxxxxxx 590 Analog Input Funktionsblock 7
DISCRETE_OUTPUT_ xxxxxxxxxxx 780 Discrete Output Funktionsblock
PID_ xxxxxxxxxxx 810 PID Funktionsblock