Endress+Hauser Proline Promag 51, Operating Instructions Manual

Page: 111 / 124

Proline Promag 51 10 Technical data
Hauser 111
Limiting medium pressure
range (nominal pressure) The material load diagrams (pressure-temperature graphs) for the process connections are to be
found in the following documents:
• Technical Information “Promag 50/53W” (TI 046D/06/en)
• Technical Information “Promag 50/53P” (TI 047D/06/en)
Promag W:
EN 1092-1 (DIN 2501): PN 6 (DN 1200...2000), PN 10 (DN 200...2000), PN 16 (DN 65...2000),
PN 25 (DN 200...1000), PN 40 (DN 25...150)
Promag P:
EN 1092-1 (DIN 2501): PN 10 (DN 200...600), PN 16 (DN 65...600), PN 25 (DN 200...600),
PN 40 (DN 15...150)
Pressure tightness
(liner)
Limiting flow see Page 24
Pressure loss • No pressure loss if the sensor is installed in a pipe of the same nominal diameter.
• Pressure losses for configurations incorporating adapters according to DIN EN 545
→
Page 22
Promag W
Nominal diameter
Measuring
tube lining
Resistance of measuring tube lining to partial vacuum
Limit values for abs. pressure [mbar] at various fluid temperatures
[mm] [inch] 25 °C 50 °C 80° C 100 °C 130 °C 150 °C 180 °C
25…1000 1…40" Polyurethane 0 0
− − − − −
65…2000 3…78" Hard rubber 0 0 0
− − − −
Promag P
Nominal diameter
Measuring
tube lining
Resistance of measuring tube lining to partial vacuum
Limit values for abs. pressure [mbar] at various fluid temperatures
[mm] [inch] 25 °C 80 °C 100 °C 130 °C 150 °C 180 °C
15 1/2" PTFE 0 0 0 100 – –
25 1" PTFE / PFA 0 / 0 0 / 0 0 / 0 100 / 0 – / 0 – / –
32
−
PTFE / PFA 0 / 0 0 / 0 0 / 0 100 / 0 – / 0 – / –
40 1 1/2" PTFE / PFA 0 / 0 0 / 0 0 / 0 100 / 0 – / 0 – / –
50 2" PTFE / PFA 0 / 0 0 / 0 0 / 0 100 / 0 – / 0 – / –
65
−
PTFE / PFA 0 / 0 * 40 / 0 130 / 0 – / 0 – / –
80 3" PTFE / PFA 0 / 0 * 40 / 0 130 / 0 – / 0 – / –
100 4" PTFE / PFA 0 / 0 * 135 / 0 170 / 0 – / 0 – / –
125
−
PTFE / PFA 135 / 0 * 240 / 0 385 / 0 – / 0 – / –
150 6" PTFE / PFA 135 / 0 * 240 / 0 385 / 0 – / 0 – / –
200 8" PTFE / PFA 200 / 0 * 290 / 0 410 / 0 – / 0 – / –
250 10" PTFE 330 * 400 530 – –
300 12" PTFE 400 * 500 630 – –
350 14" PTFE 470 * 600 730 – –
400 16" PTFE 540 * 670 800 – –
450 18" PTFE
Partial vacuum is impermissible 500 20" PTFE
600 24" PTFE
* No value can be quoted.