Endress+Hauser Proline 500 PROFINET, Brief Operating Instructions

Page: 20 / 64

Electrical connection Proline 500 PROFINET
20 Hauser
5.1.4 Terminal assignment
Transmitter: supply voltage, input/outputs
Supply voltage Input/output 1 Input/output 2 Input/output 3
1 (+) 2 (–) PROFINET
(RJ45 connector)
24 (+) 25 (–) 22 (+) 23 (–)
Device-specific terminal assignment: adhesive label in
terminal cover.
Transmitter and sensor connection housing: connecting cable
The sensor and transmitter, which are mounted in separate locations, are interconnected by a
connecting cable. The cable is connected via the sensor connection housing and the
transmitter housing.
Terminal assignment and connection of the connecting cable →  26.
5.1.5 Device plugs available
Device plugs may not be used in hazardous areas!
Order code for "Input; output 1", option RA "PROFINET"
Order code for Cable entry/connection
"Electrical connection" 2 3
L, N, P, U Connector M12 × 1 –
R
1) 2)
, S
1) 2)
, T
1) 2)
, V
1) 2)
Connector M12 × 1 Connector M12 × 1
1) Cannot be combined with an external WLAN antenna (order code for "Enclosed accessories", option P8) of an
RJ45 M12 adapter for the service interface (order code for "Accessories mounted", option NB) or of the remote
display and operating module DKX001.
2) Suitable for integrating the device in a ring topology.
5.1.6 Pin assignment of device plug
3
2
4
1
A0016812
Pin Assignment
1 + TD +
2 + RD +
3 - TD –
4 - RD –
Coding Plug/socket
D Socket