Micropilot M
10
Hauser
Terminal assignment 4…20 mA with HART
The 2-wire cable is connected to the screw
terminals (wire diameter 0.5…2.5mm) in the
terminal compartment.
Use 2-wire twisted pair cable with screen for
the connection.
Protective circuitry against reverse polarity,
RFI, and over-voltage peaks is built into the
device (refer to TI 241F »basics for EMC-
tests«).
Terminal assignment PROFIBUS-PA
The digital communication signal is transmitted
to the bus via a 2-wire connection. The bus also
provides the auxiliary energy.
Please use 2-wire twisted pair cable with
screen.
Hints regarding architecture and grounding of
the network can be found in BA 198F
»projecting hints PROFIBUS-PA« and the
specification for PROFIBUS-PA.
Terminal assignment Foundation Fieldbus
The digital communication signal is transmitted
to the bus via a 2-wire connection. The bus
also provides the auxiliary energy.
Please use 2-wire twisted pair cable with
screen. Further cable specifications can be
found in the FF specification or the
IEC 61158-2.
Further hints regarding architecture and
grounding of the network can be found at the
Internet address »http://www.fieldbus.org«.
L
00-F
M
R2x
x
x
x
-04-00-00-en-002
L00-F
M
R2xxxx
-04-00
-0
0-en-003
L00-F
M
R2x
x
x
x
-04-00-00-en-00
7
www.aotewell.com
www.fa-market.com
AoteWell International.inc
Tel: +852-6563-2160
