Micropilot M
Hauser
3
Equipment architecture
Stand-alone
The Micropilot M can be used for measurement in a stilling well / bypass as well as in free space.
The instrument provides a 4…20 mA output with HART protocol, or PROFIBUS-PA respectively
Foundation Fieldbus communication.
4…20 mA output with HART protocol.
The complete measuring system consists of:
On-site operation:
•
with display and operating module VU 331,
•
with a Personal Computer, FXA 193 and the operating software ToF Tool.
The ToF Tool is a graphical operating software for instruments from Hauser that
operate based on the time-of-flight principle (radar, ultrasonic, guided micro-impulse). It assists
with commissioning, securing data, signal analysis and documentation of the measuring point.
Remote operation:
•
with HART handheld DXR 275,
•
with a Personal Computer, Commubox FXA 191 and the operating software COMMUWIN II
respectively ToF Tool.
L0
0-F
M
R2x
x
x
x
-14-00-06-en-001
www.aotewell.com
www.fa-market.com
AoteWell International.inc
Tel: +852-6563-2160
