Repair
Memosens COL37E
12
Hauser
7
Repair
7.1
General information
‣
Only use spare parts from E Hauser to guarantee the safe and stable functioning of
the device.
Detailed information on the spare parts is available at:
www.endress.com/device-viewer
7.2
Return
The product must be returned if repairs or a factory calibration are required, or if the wrong
product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
www.endress.com/support/return-material
procedure and conditions for returning devices.
The product must be returned if repairs or a factory calibration are required, or if the wrong
product was ordered or delivered.
To ensure safe, professional and swift product returns, please contact your local Sales Center
for information on the procedure to be followed and general conditions.
7.3
Spare parts and consumables
• Maintenance kit for Memosens COL37E
• Scope of delivery of the:
• Spot cap
• O-ring mounting tool
• Maintenance instructions
• Calibration bottle
• O-rings
• Certificate
• Ordering information:
under "Accessories/spare parts"
7.4
Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the disposal
of WEEE as unsorted municipal waste. Do not dispose of products bearing this marking as
unsorted municipal waste. Instead, return them to Hauser for disposal under the
applicable conditions.
