Mounting
Memosens CFS51
18
Hauser
Preparatory steps for the sensor without an installed clamping ring:
1.
1
2
A0048476
1
Union nut
2
Ring clip
Slide the ring clip onto the sensor from below.
2. Slide the union nut onto the sensor from below.
3.
1
2
A0048477
1
Clamping ring
2
Alignment lines
Slide the clamping ring onto the sensor.
4. Make sure that the joint of the clamping ring is perpendicular to the optical window.
5. Position the clamping ring on the alignment lines of the sensor → 10.
