Endress+Hauser Master Meter System Operating Instructions Manual Download Page 52

Page: 52 / 60

Maintenance and repair

Master Meter System

Hauser

Maintenance and repair

10.1 General information

• Use only original spare parts.

• Compliance with all applicable standards, regional/national laws and certificates is

mandatory.

• Repairs may be carried out only by Hauser service employees or by suitably

trained customer staff.

10.2 Cabinet fan

The filter mat of the cabinet fan must be checked periodically. If necessary, clean the filter

mat or replace it with a mat of the correct type.

10.3 Spare parts

Manufacturer

Description

Type

EH material no.

Newflow

Flow computer

NÅNO-311

71526319

Moxa

Ethernet switch

EDS-208

71526312

Teltonika

Industrial 4G LTE Wi-Fi router

RUT240

71534091

Teltonika

Antenna

Combo SISO Mobile

71534421

Advantech

15.6" Panel PC

PPC-3151W

71540988

B&R

15.6" Panel PC

PC 2200

71479866

B&R

Automation PC

PC 2200

71526321

ICOP

External display

PDX2-090T-8A

71473410

10.4 Spare parts and services

Regular servicing of the MM System by the system manufacturer is recommended.
For more information please contact your Hauser Sales Center at

www.address.endress.com

10.5 Disposal

Incorrect disposal of the system components may damage the environment.

• Do not dispose of system components as household waste.

• Always dispose of system components in accordance with national regulations.

• Ensure proper separation and reuse of system components.

Summary of Contents for Master Meter System





























































Search results

Summary of Contents for Master Meter System

Reviews:

Related manuals for Master Meter System

Brands by name

Popular brands

Endress+Hauser Master Meter System, Operating Instructions Manual

Search results

Summary of Contents for Master Meter System

Reviews:

Related manuals for Master Meter System

Brands by name

Popular brands