4.5
Operating concept
Operating modes
Note:
The user can put the functions and
contacts on hold during calibration
and configuration (see chapter 5.6,
page 45; function S2); the duration
of the hold period may also be
changed.
Code
SET-MOD.CDR
Setup mode:
Access to all
configuration settings
Measuring mode:
Standard mode of
operation, display of
current measured values
The function groups are
selected with the PLUS or
MINUS key
Calibration mode:
Execution of
calibration routine
Code input:
Following input of
code 22, the settings in
the function groups can
be modified.
When another code is
entered, the settings can
only be viewed but not
modified.
Fig. 4.3
Description of operating
modes
Operation
Liquisys M CPM 223 / 253
20
Hauser
