Endress+Hauser Liquicap M FMI52, Brief Operating Instructions

Page: 15 / 32

Liquicap M FMI52 HART Mounting
Hauser 15
If the cable connection has to be shortened or led through a wall, it must be separated from
the process connection.
Disconnecting the connection cable
Make sure that the connecting cable and the probe is not turning with the pressing
screw.
1 → 2 → 3 →
22
22
34
A0042111 A0042112 A0042113
‣
Loosen the pressing screw with
an open-end wrench AF22.
‣
Pull the insert seal out of the
cable gland.
‣
Block the adapter disk with the
open-end wrench AF34 and
loosen the cable gland with the
open-end wrench AF22.
4 → 5 → 6 →
1.
2.
34
A0042114 A0042115 A0042116
‣
Pull out the cable with the cone.
‣
Remove the seal and loosen the
adapter disk with the open-end
wrench AF34.
‣
Remove the snap ring with a snap
ring pliers.