Proline Promass 80
Commissioning
Hauser
45
6.3
Quick Setup
In the case of measuring devices without a local display, the individual parameters and functions
must be configured via the configuration program, e.g. FieldCare.
If the measuring device is equipped with a local display, all the important device parameters for
standard operation, as well as additional functions, can be configured quickly and easily by means
of the following Quick Setup menus.
6.3.1
"Commissioning" Quick Setup
a0004645-en
Fig. 29:
"Commissioning" Quick Setup
+
+
+
E
E
Esc
E
+
-
XXX.XXX.XX
Yes
Yes
Yes
No
No
No
Mass flow
Current output 1
Volume flow
Density
Frequency/Pulse output
Selection System Units
Selection output type
Configuration another unit ?
Configuration another output ?
Automatically configuration display ?
Temperature
Quit
Quit
Unit
Mass flow
Assign
Current
Current span
Value
0/4 mA
Value
20 mA
Time constant
Time constant
Failsafe mode
Failsafe mode
Failsafe mode
Assign
Frequency
End value
frequency
Value
F Low
Value
F High
Output signal
Assign
Pulse
Pulse value
Pulse width
Output signal
Unit
flow
Volume
Unit
Density
Operation mode
Unit
Temperature
Measuring
Mode
Unit
Totalizer
Unit
Totalizer
Frequency
Pulse
Automatically
parameterization
of the display
Language
Pre-setting
Quick Setup
HOME-POSITION
Quick Setup
Commission
Assign
Current
Current span
Value
0/4 mA
Value
20 mA
Time constant
Failsafe mode
Current output 2
n
o
p
q
Corr. Vol. flow
Unit
Corr. Vol. flow
Unit
Ref. Density
Fix
Ref. Density
r
Selection pre-settings
Actual Settings
Deliver Settings
y
m
