CUM 750 / CUS 70
Operation
Hauser
23
6.5 SYSTEM SETUP menu
SYSTEM SETUP
I
Measure
LEVEL / RANGE
I
Units
[m], [cm
]
, [in], [ft], [yd]
I
Recall / Save
FACTORY PRESET / USER
I
No. of points
1 ... 4
Function:
The SYSTEM SETUP option allows access to the general basic settings which are valid for all
connected sensors and measuring points.
Measure:
This parameter determines the measurement type which should be calculated and displayed. By
choosing LEVEL, the system measures the separation zone from the bottom of the basin. For this, the
basin depth should be exactly determined using the MODIFY POINTS option.
By choosing RANGE, the system measures the area between the sensor position and the separation
zone.
Units:
Set the required units using this option. At system start-up, the data appears in [m]. Any changes are
automatically shown in all displays.
Setting range: [m], [cm], [in], [ft], [yd]
Recall / Save:
Retrieve the user-defined configuration using this option.
You can save the user-specific configurations for retrieval at a later date by choosing the SAVE
command.
Choose between the default parameters (FACTORY PRESET) or user-defined parameters (USER) by
selecting the RECALL command.
No. of points:
Depending on the instrument version (one to four-channel version), choose the measuring point for
which a configuration change is necessary.
Setting range: 1 ... 4
Operation:
Move through the submenu by pressing the
→
→
→
→
key; select the numeric value by pressing the '
↑↑↑↑
‘ /. '
↓↓↓↓
‘
keys (see Chap. 6.1 "Key assignment"). Confirm and return to the main menu by pressing the ‘E’ key.
