ControlCare Field Controller: Commissioning and Configuration
3 FF Field Controller
Hauser
19
3.5
Add a fieldbus segment
1 The project now looks like this:
2 Right click on the bridge you just created, here
"Bridge 1"
, and select
New Fieldbus
.
3 The
New Fieldbus
dialog box appears:
Enter a Fieldbus TAG, select the fieldbus port on the SFC162
Check the
Is Redundant
box, only if this fieldbus is to be connected to another SFC162
Field Controller
If you do not type in a tag, the default will be "Fieldbus n", where n is a consecutive number. At
this point, the Fieldbus Network does not have a direct correspondence to any of the existing
controllers.
4 Press
OK
to create the Fieldbus.
5 Open
Project File
, then press
Save
, to save the project.
6 Repeat Steps 1 to 5 for as many fieldbus as are in use.
7 You can now proceed with Configuring the Field Controller, see Chapter 5.