manualshive.com logo in svg

Endress+Hauser Cerabar M PMC41, Technical Information

The Endress+Hauser Cerabar M PMC41 is a high-quality pressure transmitter offering precise measurements in industrial applications. For Technical Information and user manual download, visit manualshive.com. This user manual is available for free, providing detailed instructions on setup, usage, and maintenance of the device.

Share
Download
background image

Cerabar M

2

Hauser

Table of contents

Function and system design. . . . . . . . . . . . . . . . . . . . . 4

Device selection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview of diaphragm seals for PMP46   . . . . . . . . . . . . . . . . . . . 5
Overview of diaphragm seals for PMP48 . . . . . . . . . . . . . . . . . . . . 6
Measuring principle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Communication protocol   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Human interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Onsite display (optional)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating elements   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Onsite operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Handheld terminals – HART  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FieldCare – HART, PROFIBUS PA   . . . . . . . . . . . . . . . . . . . . . . . 11
Commuwin II – HART, PROFIBUS PA  . . . . . . . . . . . . . . . . . . . . 11

Input  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Measured variable   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Measuring range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Explanation of terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Output signal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Signal range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Signal on alarm   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Load – 4 to 20 mA and 
4 to 20 mA HART   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resolution   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Dead time, time constant (T63)   . . . . . . . . . . . . . . . . . . . . . . . . . 16
Dynamic behavior 4...20 mA (Analog electronic)   . . . . . . . . . . . . 16
Dynamic behavior current output (HART electronic) . . . . . . . . . . 16
Dynamic behavior digital output (HART electronic) . . . . . . . . . . . 16
Dynamic behavior PROFIBUS PA  . . . . . . . . . . . . . . . . . . . . . . . . 17
Damping   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Electrical connection   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Supply voltage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Current consumption  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cable entry   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cable specification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Residual ripple  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Performance characteristics – general . . . . . . . . . . . . 21

Reference operating conditions  . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Reference accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Uncertainty of measurement for small absolute pressure measuring 
ranges   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Long-term stability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Influence of the orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Raising and lowering the zero point   . . . . . . . . . . . . . . . . . . . . . . 21
Vibrations effects   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Warm-up period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Rise time (T90)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Settling time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Performance characteristics – ceramic diaphragm  . . 23

Reference accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Thermal change of the zero output and the output span  . . . . . . .  23
Temperature coefficient (TK) for zero output and output span . . .  23

Performance characteristics – metal diaphragm  . . . . 24

Reference accuracy   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Thermal change of the zero output and the output span  . . . . . . .  24
Temperature coefficient (TK) for zero output and output span . . .  24

Operating conditions (installation)  . . . . . . . . . . . . . . 25

General installation instructions  . . . . . . . . . . . . . . . . . . . . . . . . .  25
Measuring arrangement for devices without a diaphragm seal – 
PMC41, PMC45, PMP41, PMP45  . . . . . . . . . . . . . . . . . . . . . . .  25
Mounting with temperature isolator  . . . . . . . . . . . . . . . . . . . . . .  25
Wall and pipe-mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Oxygen applications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
PWIS-free applications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
Ultrapure gas applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27

Operating conditions (environment) . . . . . . . . . . . . . 28

Ambient temperature limits  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Storage temperature range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Degree of protection   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Climate class  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Electromagnetic compatibility   . . . . . . . . . . . . . . . . . . . . . . . . . .  28

Operating conditions (process)  . . . . . . . . . . . . . . . . . 29

Process temperature limits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29
Temperature operating range, seals   . . . . . . . . . . . . . . . . . . . . . .  29
Pressure specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30

Mechanical construction . . . . . . . . . . . . . . . . . . . . . . 31

Dimensions of stainless steel housing  . . . . . . . . . . . . . . . . . . . . .  31
Dimensions of aluminum housing   . . . . . . . . . . . . . . . . . . . . . . .  31
General Note on flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31
Process connections PMC41
(with ceramic measuring diaphragm)  . . . . . . . . . . . . . . . . . . . . .  31
Process connections PMC45
(with ceramic measuring diaphragm)  . . . . . . . . . . . . . . . . . . . . .  33
Process connections PMP41 (with metal measuring diaphragm)  .  41
Process connections PMP45 (with metal measuring diaphragm)  .  43
Process connections PMP46 (with metal measuring diaphragm)  .  45
Process connections PMP48 (with metal measuring diaphragm)  .  51
Weight   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

Planning instructions for diaphragm seal systems . . . 59

Applications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Planning instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59
Diaphragm seal filling oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60
Influence of the temperature on the zero point  . . . . . . . . . . . . . .  61
Ambient temperature range  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
Installation instructions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65

Certificates and approvals . . . . . . . . . . . . . . . . . . . . . 66

CE mark   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66
Ex approvals   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Summary of Contents for Cerabar M PMC41





















































































Reviews:

No comments

Related manuals for Cerabar M PMC41

Callaway 200 S Manual preview
200 S
Brand: Callaway Pages: 11
E Instruments E500 Quick Manual preview
E500
Brand: E Instruments Pages: 2
VELOCICALC 9515 Operation And Service Manual preview
9515
Brand: VELOCICALC Pages: 6
Panametrics GF868 Service Manual preview
GF868
Brand: Panametrics Pages: 68
Parkside PMSHM 2 A1 Operation And Safety Notes preview
PMSHM 2 A1
Brand: Parkside Pages: 120
ESP LTD KH-602 Owner'S Manual & Warranty Information preview
LTD KH-602
Brand: ESP Pages: 12
LEGRAND LG-41492 Quick Start Manual preview
LG-41492
Brand: LEGRAND Pages: 5
Kawai Digital Piano CA750 Owner'S Manual preview
Digital Piano CA750
Brand: Kawai Pages: 76
LaserLine GL3000PM Owner'S Manual preview
GL3000PM
Brand: LaserLine Pages: 11
SANKO SWT-7200 II Instruction Manual preview
SWT-7200 II
Brand: SANKO Pages: 97
Staco Energy EMD Quick Manual preview
EMD
Brand: Staco Energy Pages: 2
Kawai KSP 10 Owner'S Manual preview
KSP 10
Brand: Kawai Pages: 72
M&C SP180-H Instruction Manual preview
SP180-H
Brand: M&C Pages: 18
CONDTROL NEO X1-360 User Manual preview
NEO X1-360
Brand: CONDTROL Pages: 27
Tegam R1L-BR1 Instruction Manual preview
R1L-BR1
Brand: Tegam Pages: 36
S+S Regeltechnik RHEASREG KLSW-3 Operating Instructions, Mounting & Installation preview
RHEASREG KLSW-3
Brand: S+S Regeltechnik Pages: 32
JBM Surecom SW-102 Quick Start Manual preview
Surecom SW-102
Brand: JBM Pages: 4
Omega FMG490 Series User Manual preview
FMG490 Series
Brand: Omega Pages: 24

Brands by name

Popular brands

Load more brands