Endress+Hauser Cerabar M PMC41, Technical Information

Page: 73 / 84

Cerabar M
Hauser 73
D DKD certificate; see additional specification
9 Special version, to be specified
50 Output; Operation:
A 4 to 20 mA analog; without display
C 4 to 20 mA analog; display bar graph
H 4 to 20 mA SIL HART; without display
J 4 to 20 mA SIL HART; display 4-digit + bar graph
P PROFIBUS PA; without display
R PROFIBUS PA; display 4-digit + bar graph
W Without electronics; without display
Y Special version, to be specified
60 Additional option:
1 Basic version
2 Mounting bracket, wall/pipe
C EN10204-3.1 (wetted) inspection certificate
S GL/RINA marine approval
B SIL + EN10204-3.1 material (wetted parts) inspection certificate SIL Declaration of
Conformity
U SIL Declaration of Conformity
9 Special version, to be specified
70 Process connection:
Threaded connection
1M Thread ISO 228 G1/2, 316L
1D Thread ISO 228 G1/2 seal O-ring, 316L, flush-mounted (adapter 52002643)
1F Thread ISO 228 G1/2 seal DIN 3852, 316L, flush-mounted
1G Thread ANSI MNPT 1/2 hole 11.4 mm, 316L
1X Thread ANSI FNPT 1/2 , 316L
1S Thread JIS B0202 G1/2 (male), 316L
1 K Thread JIS B0203 R1/2 (male) bore 11.4 mm, AISI 316L
1T Thread DIN13 M 20x1.5, AISI 316L
9Y Special version, to be specified
80 Seal; Fill fluid:
1 FKM Viton; synthetic oil
4 FKM Viton, inert oil, cleaned from oil + grease
F NBR O-ring; synthetic oil
H FKM Viton O-ring; synthetic oil
P FTFE; synthetic oil
A Welded; mineral oil
C Welded; inert oil, oxygen service
2
D Welded, inert oil, cleaned from oil+grease
9 Special version, to be specified
PMP41 Complete order code
40 Calibration; Unit: