Cerabar M
Hauser
11
FieldCare – HART,
PROFIBUS PA
FieldCare is Hauser's plant asset management tool which is based on FDT technology. With
FieldCare, you can configure all of Hauser devices, as well as devices from other manufacturers that
support the FDT standard.
FieldCare supports the following functions:
• Configuration of transmitters in offline and online mode
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB interface of a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
For more information, see
→
www.endress.com.
Commuwin II – HART,
PROFIBUS PA
Commuwin II is a graphically supported operating program for intelligent measuring devices with the HART
and PROFIBUS PA communication protocols. The following operating systems are supported: Win 3.1/3.11,
Win 95, Win 98, WinNT4.0 and Win2000. Commuwin II shows the most important parameters.
Commuwin II supports the following functions:
• Configuration of measuring devices in online mode via matrix operation
• Loading and saving device data (upload/download)
• Visualization of measured values and limit values
• Presentation and recording of measured values with a line recorder
Connection options:
• HART via Commubox FXA191 and the RS 232 C serial interface of a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
Summary of Contents for Cerabar M PMC41
Page 83: ...Cerabar M Endress Hauser 83...
