CyBio Carry
Transport and storage
43
1
2
3
Fig. 34
Transport box
1 Linear axis transport lock
2 Pad for gripper tower
3 Hold-down piece with transport pocket
Opening and reassembling the
transport box
The transport box consists of a pallet floor, two short and two long side pan-
els and a lid.
The individual parts are connected using clamping brackets that are inserted
in the recesses at the edges of the side parts.
The brackets have a long and a short end and can be installed in only one
way.
The tool required to remove the brackets is screwed to the transport box.
}
Unscrew the opening tool from the box.
}
Screw the tool back to the box after assembly.
}
Remove the brackets as follows:
– Slide the tool under the longer end of the bracket from the side and
carefully lift off the bracket.
– Hold the bracket with one hand while doing so.
CAUTION! Risk of injury! If you do not hold the bracket when remov-
ing it, the bracket can fly off and cause injury.
