Endress+Hauser Analytik Jena CyBio Well vario, User Manual

Page: 89 / 150

Rev B 2022/03 73
CyBio Well vario Operation
3. Insert a capillary magazine with tips until mechanical stop position. Make sure that
the magazine is evenly seated on the frame. If the magazine is correctly placed, you
may trigger an automatic magazine plate clamping cycle.
Note:
If a magazine is misplaced, the microswitch will be triggered and the screen display a
"Insert magazine (with tips)" prompt.
Fig. 81: Display – tip change – magazine insertion
4. Confirm clamped state by pressing key .
Note:
Once the magazine plate is fixed, the screen will display the menu in which a tip
change was selected.
Fig. 82: Display – tip change – tightening of tips
CAUTION
Prevent damage to the system!
Only capillary-filled magazines may be inserted and clamped! Insertion of a magazine is mon-
itored by a microswitch. If a magazine is placed in a non-conforming manner, an "Insert mag-
azine (with tips)" prompt will appear.
Should this microswitch fail, the system may suffer damage. Shut the pipettor down and
promptly notify the manufacturer in this case.
Changing tips
Insert tip magazine (with tips only)
Changing tips
Tighten tips
TIP
Please note the microplate settings when you perform a magazine change.
TIP
A tip change can also be performed via [Dispense] menu (
→
Fig. 75 ).