Endress+Hauser 2-Pack TDLAS, Safety Instruction

Page: 31 / 36

2-Pack/3-Pack TDLAS Gas Analyzer XA02751C
Hauser 27
Fuse Replacement
1. Power off the system and close the sample supply valve.
2. Open the electronics enclosure. For Analyzer A fuse locations →  5–1
(AC) or →  5–2 (DC). For Analyzer B fuse locations →  5–3,
→  5–4 (AC) or →  5–5 (DC).
3. Using a flat-head screwdriver, remove the fuse screw turning counter -
clockwise as shown in the example below.
4. Remove the fuse cover and fuse.
5. Remove the fuse from the cover and replace with a new fuse as shown
below →  20.
Figure 5–6 Unscrewing fuse cover
FUSE COVER
Figure 5–7 Replacing fuse
FUSE