2-Pack/3-Pack TDLAS Gas Analyzer
XA02751C
Hauser
3
2
General Safety Information
This chapter reviews the general safety instructions for the 2-Pack/3-Pack
gas analyzers.
Intended Equipment
Use
The 2-Pack/3-Pack gas analyzers are intended for use as explained in the
documentation provided. Hauser recommends that the qualified
technician read and reference the documentation when installing, operating
or having direct contact with the 2-Pack/3-Pack gas analyzer. Any use of the
equipment in a manner not specified by Hauser could lead to phys
-
ical injury and damage to the equipment.
Warning Labels
Equipment labels are adhered to the 2-Pack/3-Pack gas analyzers to alert
the user of potential hazards. Instructional symbols are also used in the
equipment manuals to indicate potential hazards, important information
and valuable tips, and may not be labeled on the analyzer. The following
symbols and their associated descriptions are used within this manual and
must be observed when operating the analyzer.
Safety warning label
The warning label shown below will be affixed to the front side of all analyzer
enclosures that contain sample gas.
Facing the 2-Pack/3-Pack gas analyzer, Analyzer A is on the
left side and Analyzer B is on the right side.
The safety of the analyzer is the responsibility of the installer
and the organization s/he represents.
Summary of Contents for 2-Pack TDLAS
Page 35: ......
