30.
SIDECHAIN
/ENV DEPTH*
KNOB:
Sets the decay of the
onboard envelope from zero (no envelope) to approx. 5 seconds. When
turned while pressing the
ROUTING
/*
button, this knob adjusts the depth of
the envelope to the internal sidechain audio ducking effect.
31.
ENVELOPE OUTPUT JACK:
0…+5V envelope output
triggered from
TRIG IN
jack. The envelope has fixed 1 msec attack and a
natural-sounding exponential curve. While the internal envelope for
sidechaining is negative (to duck the audio) this output provides a positive
version of the envelope to use elsewhere in your system or modulating
module’s parameters.
32.
COMPRESSOR KNOB:
manual control over the amount of
compression applied after the effects processing chain, is summed with an
external CV applied to the
COMPRESSOR CV
IN
jack.
33.
COMPRESSOR CV IN JACK:
0…+5V external CV input for
the compressor amount.
34.
VOLUME
/DRIVE
KNOB:
controls the final output volume. Acts
as an attenuator for the
POST VCA
CV
jack. When the knob passes after 15
o’clock it adds extra
DRIVE
saturation to the output signal while trying to
maintain its amplitude.
35.
POST-VCA CV INPUT JACK:
0…+5V external CV input for
the final volume level. Normalled to +5V when no patch cable is inserted.
36.
OUT 1
,
OUT 2 JACKS:
final stereo audio outputs.
OUTPUT 1
is typically left and
OUTPUT 2
is typically right.
OUTPUTS 1/2
can drive
headphones or be used as separate mono L/R outputs connected with mono
cables. When each jack is used with stereo TRS cables, these outputs can
be used in
PSEUDO-BALANCED CONNECTION
for example to your audio
interface directly. Pseudo-balanced connection ensures less noise hum on
the long cables but cuts the audio signal amplitude by half – to approximate
pro-line
level +/-2.5V. Both audio inputs and outputs support airline audio
jack adapter (sold separately) to connect a 3.5mm TRS stereo (AUX) cable
directly.
Summary of Contents for GHOST 16hp
Page 1: ...FIRMWARE V 1 00 RC ...
Page 5: ...INTERFACE ...
