Endorphines GHOST 16hp, Manual

Page: 6 / 17

FRONT PANEL CONTROLS
1.
IN 1 , IN 2 JACKS:
stereo audio inputs, INPUT 1 (typically left) – is
normalled , i.e. pre-routed  to INPUT 2 (right) when no audio cable is present
on INPUT 2 . Typical input audio level: eurorack m/-5V with maximum
up to +/-9V when saturation starts with higher audio amplitude.
2.
PRE-VCA CV INPUT JACK:
external 0…+5V CV input that controls
the amplitude of the incoming stereo signal. Normalled to +5V when no patch
cable is inserted.
3.
TONE
/GAIN*
KNOB:
multi-function knob. By default it acts as a
6db/oct TILT EQ for low and high frequencies (CCW and CW respectively)
with no effect when the knob is at 12 o’clock. Secondary function is a gain
boost for incoming audio, activated by turning while holding the
ROUTING
button. Fully CCW the signal is at its original level - turn CW to boost.
4.
DISTORTION KNOB:
manual control over the distortion level. Is
summed with an external CV applied to the DIST. CV jack.
5.
DISTORTION CV JACK:
external 0…+5V control over the distortion
level.
6.
CLIP LED:
lights up when clipping occurs at the distortion stage.
7.
FREQUENCY KNOB:
manual control over the FILTER CUTOFF .
8.
VCF CV INPUT JACK:
-5V…+5V CV input for the FILTER CUTOFF .
The polarizer CUTOFF CV knob defines its amount, mixed with the setting of
the
FREQUENCY knob.
9.
CUTOFF CV KNOB:
polarizer / attenuverter for incoming CV to the
FILTER CUTOFF.
10.
DELAY DRY/WET CV JACK:
0…+5V external CV input for
the DRY/WET mix of the delay effect. Normalled to +5V when no patch cable
inserted.
11.
DELAY KNOB:
manual control of the DRY/WET MIX OF THE
DELAY effect, acts as attenuator for DRY/WET CV jack .
12.
REPEATS
/TONE*
KNOB:
manual control over REPEATS or
FEEDBACK level of the delay. Turn it fully CW for self-oscillation. Secondary
/TONE* function (holding ROUTING while turning REPEATS
/TONE*
) adjusts
the LOW-PASS FILTER after the WET output of the delay chain. Is summed
with an external CV applied to the
REPEATS CV jack.
13.
REPEATS CV JACK:
0…+5V external CV input for the
feedback control of the delay effect.