Endorphines GHOST 16hp, Manual

Page: 15 / 17

LOW-END GROOVE A.K.A. TECHNO RUMBLE
BASS
ROUTING 2
Modern techno music is defined by a groovy low­end rumble which along with the kick
drum defines the key element of the style. Ghost can generate such rumble from any
transient sound or same kick applied into the audio inputs.

• Set the ROUTING mode to the second order ( DISTORTION•VCF•FX ) when ROUTING
button is semi lit

• Split your 909­style kick drum and apply it into AUDIO IN 1 .

• Set the DISTORTION and COMPRESSOR knobs to own taste, usually around 12
o’clock
 • Set the
VCF
filter type to normal LP/HP and set the filter
FREQUENCY
knob around 11
o’clock

• Apply clock from your sequencer into CLOCK IN jack (typically expected in 16
th
notes)
and set the TIME/DIV knob to obtain desired repeats. Set DELAY DRY/WET and
REPEATS to own taste, usually both around 12 o’clock

• Enable REVERSED REVERB by R HOLD/reverse* . Set REVERB DRY/WET
and TAIL to your own taste until you obtain a whooshing sound. For proper groove set the
pre­delay amount by R TAIL/preleday* to approx. 12 o’clock

• Apply kick­drum trigger into SIDECHAIN TRIG IN jack. Set the ducking envelope
amount to 50% with R SIDECHAIN to 12 o’clock. Then move SIDECHAIN knob
alone to around 10­11 o’clock to catch the proper pumping time

• Mix the sound from AUDIO OUT 1/2 with the original kick drum using a mixer such as
Cockpit2.

• TIP: it is best to keep your low end consistent or even better ­ MONO. So when using
the delay to create the rumble, set TAPS DISTRIBUTION to STEREO mode via ROUTING
+ TAP to avoid PING­PONG effect or simply only use AUDIO OUT 1 .
GHOST DRONE
ROUTING 3
GHOST structure and multidimensional modulation matrix is capable of producing dark
drones and ephemeral soundscapes full of texture and harmony.

• Set the ROUTING mode to the third order ( VCF•FX•DISTORTION ) when ROUTING
button LED is off when ROUTING button is fully lit
.
 • Select the COMB FILTER by pressing the R FILTER BUTTON and set the
RESONANCE fully CW