Fastlane
®
Pro Swim Unit Installation
Fastlane
®
Pro Swim Unit Installation
Section 2
CHOOSING A LOCATION FOR YOUR FASTLANE PRO
The Fastlane Pro can fit in virtually any swimming pool. For optimal water flow, we recommend that you
allow at least 12 feet (3,7m) between the wall on which the Fastlane Pro is installed and the opposing
wall in line with the Swim Unit. The Fastlane Pro has more than 9 square feet (.83m2) of water intake to
eliminate any entrapment hazards. The water depth where the Fastlane Pro is installed must be at least 39"
(99cm) deep. In addition, the Fastlane Pro must be installed no closer than 24" (61cm) from any adjacent
wall as shown in Figure 2.1, Minimum Clearance Guidelines.
When choosing a location for your Fastlane Pro, you should also consider the route for the hydraulic
hoses to run back to the Power Unit. The Power Unit needs to sit on a solid, level surface, preferably not
on wet ground, and requires a 30-amp, 220-volt GFCI electric service. For UK and international electrical
requirements, please refer to Section 11. The optional Outdoor Power Unit with Weather Guard may be
located outside, but should not be subject to driving rain. Typically, the Power Unit is located with the other
pool equipment and, if possible, long hydraulic runs should be avoided because of pressure loss. If you
wish to have a run greater than 25' (7,6m), you must transition from 3/8" (9,5mm) hydraulic hoses to 1/2"
(12,7mm) run hoses with the addition of a junction box as reviewed in Section 5.
Fig. 2.1 Minimum Clearance Guide
Section 3
RECEIVING YOUR FASTLANE PRO
The Endless Pools Fastlane Pro is comprised of a minimum of six (6) parcels. Additional parcels may be
shipped as appropriate. All items will be shipped via UPS Ground.
Items shipped UPS
Parcel 1: Fastlane Pro Propulsion Housing Kit
Parcel 2: Fastlane Pro Propulsion Base Kit
Parcel 3: Hydraulic Power Unit (wireless remote controls and antenna kit located inside controller)
Parcel 4: Hydraulic Fluid (5 Gallon container)
Wall Mount Fastlane Pro
Parcel 5: Wall Mount Fastlane Pro Mounting Kit (wall mount bracket and hardware for wall mount kit)
Parcel 6: Accessory Kit for Fastlane Pro (hat sections, propulsion housing lid, hardware kit
for Fastlane Pro assembly)
Deck Mount Fastlane Pro
Parcel 5: Accessory Kit for Fastlane Pro (hat sections, propulsion housing lid, hardware kit
for Fastlane Pro assembly)
Bracket Kit for Deck Mount Fastlane Pro (hanging bracket, deck plate, hardware for bracket kit)
Optional
Equipment
Weather Guard
Floor Mirror
Swim Pace Display
Wi-Fi Kit (included in the accessory kit if purchased)
8