Endace Measurement Systems
®
Ltd
http://www.endace.com
EDM05.05-01r1 TDS-2 Module TDS-6 Unit User Manual
Copyright© All rights reserved
4
Version 2. 22 September 2005.
2.1.1 TDS-2 Time Distribution Server Module Architecture
, continued
CAUTION
The standard Ethernet cables and patch equipment do not carry Ethernet
signals and must never be connected to Ethernet equipment such as hubs,
routers, or NICs.
TDS-2 module
face-plate
The TDS-2 module face-plate is fitted with:
•
Signal source selector switch
•
CDMA signal input connector
•
GPS signal input connector
•
LED’s for power source, PPS and SERIAL signal status
•
Timing signal outlet ports
Figure
Figure 2-1 shows the TDS-2 module face-plate architecture.
Figure 2-1. TDS-2 Module Face-plate Architecture.
The timing signal outputs are provided through RJ45 connectors, and may
be connected to DAG cards with standard Ethernet cables and patch
equipment.
When DC power is provided to the module, the power LEDs display.
Continued on next page
