Endace Measurement Systems
®
Ltd
http://www.endace.com
EDM05.05-01r1 TDS-2 Module TDS-6 Unit User Manual
Copyright© All rights reserved
15
Version 2. 22 September 2005.
APPENDIX A – TDS-2 MODULE, CONNECTOR SPECIFICATIONS
Introduction
The specifications for the TDS-2 module connector pin-outs include:
•
RS422 RJ45 Timing DB2J to DB9 Signal Output
•
RS232 DB9 CDMA Input
•
RS422 DB9 GPS Input
•
RS232 Host PC Connection
•
RS422 RJ45 Timing Signal Output
•
DB25 to DB9 GPS Adapter
RS422 RJ45 Timing DB2J to DB9 Signal Output
Description
The TDS-2 module has two RJ45 socket outputs for connecting to DAG
card RS422 synchronisation input port. The socket consists of 8 pins.
The pin-out configuration is shown below.
1: NC
2: NC
3: PPS
Out+
4: SERIAL
Out+
5: SERIAL
Out-
6: PPS
Out-
7: NC
8: NC
Figure
Figure 5-1 shows the DAG RJ45 plug and socket pin-out configuration..
Figure 5-1. DAG RS45 Plug and Socket Pin-out Configuration.
