Endace DAG 5.2X, User Manual

Page: 32 / 66

EDM01-33v1 DAG_7.5G4_Card_User_Guide
28 ©2008 Endace Technology Ltd. Confidential - Version 1 - November 2008
dagconfig options
dagconfig
is a software utility used to configure and display statistics.
By default all commands, unless otherwise defined, run on device 0 (
-d0
). Commands only
apply to one DAG card.
The following is a list options available in
dagconfig
. Not all options listed are applicable to
all cards.
Options: Description
-1,--porta
Port A only (default all). Multi-port cards only.
-2,--portb
Port B only (default all). Multi-port cards only.
-3,--portc
Port C only (default all). Four-port cards only.
-4,--portd
Port D only (default all). Four-port cards only.
--porte to --portp
As above, for extra ports on the 3.7T DAG card.
-c,--concfg <conncfg>
Connection configuration. Used by the DAG 7.1S only.
-C,--counters
Outputs the counters. Verbosity levels from 0=(basic / default) to
3=(full).
-d,--device <device>
DAG device to use. Default is d0.
-e,--extended
Displays the current extended statistics (non boolean and image
dependant). Verbosity levels from 0=(basic / default) to 3=(full).
Note: Some images may not contain extended statistics.
-G,--getattribute <getattribute>
Gets individual attributes by attribute name. Use in conjunction with
the --porta or --portb options to get individual only multi-port cards.
-h,--help
Displays the MAN pages. The information displayed is dynamically
based on the DAG card and does not work correctly when there is no
DAG card in the system.
Note: There are a few commands that display even though they are not
applicable.
-i,--interval <seconds>
Interval to repeat in seconds.
-m,--hmon
Outputs the hardware monitor information.
-n,--voltages
Outputs the DAG card voltage monitor information.
-S,--setattribute <setattribute>
Sets individual attributes by attribute name. Use in conjunction with
the --porta or --portb options to get individual only multi-port cards.
-s,--statistics
Outputs the statistics for the DAG card. Verbosity levels from 0=(basic
/ default) to 3=(full).
-T,--tree
Outputs the supported Configuration and Status attributes and
components with the description and name. Using the -v2 verbosity
level also outputs all components and attribute codes. Verbosity levels
from 0=(basic / default) to 3=(full).
-t,--txstats
Outputs the transmit statistics for the DAG card. Where applicable.
-u, --ucounters
Outputs the universal counters for the DAG card. Where applicable.
-v,--verbose <level>
Sets the verbosity level, from 0 (basic) to 3 (full).
-V,--version
Display the DAG card version information.
Note: For cards with more than 2 ports you can select the required port using: -
(portnumber) or --(portletter).