Endace Measurement Systems.
http://www.endace.com
EDM01.05-10r1 DAG 4.3S Card User Manual
14
Revision 6. 22 September 2005.
4.2 DAG 4.3S Card Capture Session
, continued
Procedure
, continued
Step 4.
Check Card is Locked to Data Stream
Configure card according to local settings.
Check through the physical layer statistics that the card is locked to the data
stream.
Step 5.
List Current Settings
For DAG 4.3S framer configuration and statistics the
dagfour
tool is
supplied.
Calling
dagfour
without arguments lists current settings.
The
dagfour -h
prints a help listing on tool usage.
Step 6.
Configure DAG for Normal Use
The
dagfour default
command is always used:
dag@endace:~$ dagfour default
light nolaser
link noreset OC48c nofcl noeql
sonet master scramble
POS crc32 nocrcstrip short=16 long=1536 discard nopscramble rxpkts txpkts
packet varlen slen=48 noalign64
packetA drop=0
pcix 133MHz 64-bit nodrop routesource=stream0 buf=32MB rxstreams=1 txstreams=1 mem=32:0
ATM
monitoring
The
default
command always sets the DAG 4.3S card to POS mode. For
ATM monitoring use
default atm
.