Mar/07
MN
14
the “
Driver\x86” folder, found on the driver CD, onto a blank floppy
disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Windows® 2000 installation procedure.
3.
Restart the computer when prompted by the installation.
4.
At the Windows® 2000 Setup screen, press
F6
to install the RAID
driver.
5.
When prompted, press
S
to specify the location of the driver.
6.
Insert the floppy disk, then press
Enter
.
7.
Select
Silicon Image SiI 3132 SoftRAID 5 Controller for
Windows 2000
, then press
Enter
.
8.
Press
Enter
again to finish driver installation, then follow the
on-screen instructions to complete the Windows installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At
Found New Hardware Wizard
, click
Next
.
3.
Select
Search for a suitable driver for
my device(recommended)
then click
Next
.
4.
Insert the driver CD, check
CD-ROM drives
, uncheck the other
